MOVIMIENTO DE SÓLIDOScaracteristicas
Cobertura de uso general de alta resistencia a la abrasión. Apta para trabajar con materiales a granel duros y cortantes. Temperatura de trabajo: -40 ºC a 80 ºC
aplicaciones
Cuarzo, pirita, hierro, granito, vidrio, rocas de canteras.
tabla de especificaciones
Selección de tipo de cobertura.
| Uso – Caracteristica | General Abrasivo | ||||
|---|---|---|---|---|---|
| SLS | SL | SY | SX | SW | |
| Abrasión | X | XX | XXX | XXXX | XXXX |
| Cortes y desgarros | – | X | XX | XXX | XXXX |
| Inflamabilidad | – | – | – | – | – |
| Antiestaticidad | XXXX | XXXX | XXXX | XXXX | XXXX |
| Aceites vegetales | – | – | – | – | – |
| Aceites minerales | – | – | – | – | – |
| Aceites calientes | – | – | – | – | – |
| Altas temperaturas | X | X | XX | X | X |
| Uso subterráneo | – | – | – | – | – |
| Uso en superficie | XX | XX | XX | XX | XX |
X:Regular XX:Bueno XXX:Muy Bueno XXXX:Excelente
Selección de espesor de cobertura
|
Tamaño del material |
Cobertura |
Ciclo de la banda |
Materiales | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Poco Abrasivo | Abrasivos | Muy Abrasivos | Abrasión extrema |
|||||||
| mm. | minutos | mín. | máx. | mín. | máx. | mín. | máx. | mín. | máx. | |
| SL | < 25 | < 0.5 | 4.0 | 5.0 | – | 7.0 | – | – | – | – |
| 0.5 – 1.0 |
2.5 | 2.5 | 4.0 | 5.0 | – | – | – | – | ||
| > 1.0 | 1.5 | 2.5 | 2.5 | 3.0 | – | – | – | – | ||
| 25 – 125 | < 0.5 | – | 7.0 | – | – | – | – | – | – | |
| 0.5 – 1.0 | 4.0 | 4.0 | – | 7.0 | – | – | – | – | ||
| > 1.0 | 2.5 | 3.0 | 5.0 | 5.0 | – | – | – | – | ||
| > 125 | < 0.5 | – | – | – | – | – | – | – | – | |
| 0.5 – 1.0 | 6.5 | 7.0 | – | – | – | – | – | – | ||
| > 1.0 | 4.0 | 5.0 | – | – | – | – | – | – | ||
| SY | < 25 | < 0.5 | 3.0 | 5.0 | 3.0 | 7.0 | 4.0 | 10.0 | 6.0 | 12.0 |
| 0.5 – 1.0 | 1.5 | 4.0 | 2.0 | 6.0 | 3.0 | 8.0 | 5.0 | 10.0 | ||
| > 1.0 | 1.5 | 3.0 | 1.5 | 4.0 | 3.0 | 6.0 | 4.0 | 8.0 | ||
| 25 – 125 | < 0.5 | 3.0 | 6.0 | 3.0 | 10.0 | 5.0 | 10.0 | 7.0 | 14.0 | |
| 0.5 – 1.0 | 3.0 | 5.0 | 3.0 | 5.0 | 4.0 | 10.0 | 6.0 | 12.0 | ||
| > 1.0 | 1.5 | 4.0 | 3.0 | 6.0 | 3.0 | 8.0 | 5.0 | 10.0 | ||
| > 125 | < 0.5 | 5.0 | 8.0 | 6.0 | 12.0 | 8.0 | 14.0 | 10.0 | 16.0 | |
| 0.5 – 1.0 | 3.0 | 7.0 | 5.0 | 10.0 | 6.0 | 12.0 | 8.0 | 14.0 | ||
| > 1.0 | 3.0 | 6.0 | 5.0 | 8.0 | 6.0 | 10.0 | 6.0 | 12.0 | ||
| SX | < 25 | < 0.5 | 2.0 | 4.0 | 2.0 | 6.0 | 3.0 | 7.0 | 4.0 | 10.0 |
| 0.5 – 1.0 | 1.5 | 3.0 | 1.5 | 4.0 | 3.0 | 6.0 | 3.0 | 8.0 | ||
| > 1.0 | 1.5 | 2.0 | 1.5 | 3.0 | 3.0 | 5.0 | 3.0 | 6.0 | ||
| 25 – 125 | < 0.5 | 3.0 | 5.0 | 3.0 | 8.0 | 4.0 | 8.0 | 5.0 | 12.0 | |
| 0.5 – 1.0 | 3.0 | 4.0 | 3.0 | 6.0 | 3.0 | 7.0 | 4.0 | 10.0 | ||
| > 1.0 | 1.5 | 3.0 | 3.0 | 5.0 | 3.0 | 6.0 | 3.0 | 8.0 | ||
| > 125 | < 0.5 | 4.0 | 7.0 | 5.0 | 10.0 | 6.0 | 12.0 | 7.0 | 14.0 | |
| 0.5 – 1.0 | 3.0 | 6.0 | 4.0 | 8.0 | 5.0 | 10.0 | 6.0 | 12.0 | ||
| > 1.0 | 3.0 | 5.0 | 3.0 | 6.0 | 5.0 | 8.0 | 5.0 | 10.0 | ||
| SW | < 25 | < 0.5 | 1.5 | 2.5 | 3.0 | 3.0 | 4.0 | 5.5 | 5.5 | 8.0 |
| 0.5 – 1.0 | 1.5 | 2.5 | 2.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | ||
| > 1.0 | 1.5 | 2.5 | 2.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | ||
| 25 – 125 | < 0.5 | 3.0 | 3.0 | 5.0 | 6.5 | 6.5 | 9.5 | 9.5 | 9.5 | |
| 0.5 – 1.0 | 2.5 | 3.0 | 3.0 | 4.0 | 5.0 | 5.0 | 5.5 | 6.5 | ||
| > 1.0 | 2.5 | 3.0 | 3.0 | 4.0 | 3.0 | 4.0 | 3.0 | 5.0 | ||
| > 125 | < 0.5 | 5.0 | 6.5 | 6.5 | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 | |
| 0.5 – 1.0 | 3.0 | 5.0 | 5.0 | 5.0 | 6.5 | 6.5 | 9.5 | 9.5 | ||
| > 1.0 | 3.0 | 5.0 | 4.0 | 5.0 | 5.0 | 5.0 | 6.5 | 6.5 | ||
Espesor de cobertura indicada en mm.
Se encuadra dentro de los parámetros indicados por la norma DIN 22102-91 grado X.
